background image

1

Dear customers,

First of all, thank you for choosing/using the 3WP-500B self propelled boom sprayer manufactured
by our company. I hope our products can bring you good economic benefits, so that you can use this
machine safely and professionally, please read the instruction manual carefully before using it. This
manual is a part of the machine, please keep it properly. It is suggested that the supplier of the new
machine or the second mobile phone should keep relevant documents to prove that the user's manual
and the machine are provided to the user at the same time.

The symbol

in this instruction manual is a safety warning symbol, which indicates important

safety information. When the symbol is seen, the possible injury shall be alerted. The information
under the symbol shall be carefully read and other operators shall be informed. It involves the
performance or service life of the machine. If it is not observed, the service performance of the
machine will be reduced or the service life of the machine will be shortened.

Note: potential hazardous situations that may cause low or moderate injury can also be used as

a reminder to avoid unsafe operations that can cause personal injury.

Warning: potentially dangerous situation that may cause death or serious injury.
Danger: a dangerous situation that will cause death or serious injury.

If you have any questions in the use process, please contact our company or product distributor, we
will serve you wholeheartedly. If you have any good opinions and suggestions, please give us your
feedback in time. Thank you!

With the development and progress of science and technology, our products are also constantly
improving and improving without notice. The picture is for reference only, please refer to the real
object! Welcome users to put forward your valuable opinions on the product!

This machine implements the following national standards:

GB 10395.1-2009 <Agricultural and Forestry Machinery Safety Part 1: General>
GB10395.6-2006 <Agricultural and Forestry Tractors and Machinery Safety Technical
Requirements Part 6: Plant Protection Machinery>
GB/T 24677.1-2009 <Technical Specification for Boom Sprayer>

Содержание 3WP-500B






























Отзывы: