13
Fig.6
Fig.7
2.1.1.Shift operation method of the shift control lever: first, push the shift control lever to "low gear",
the low gear of the gearbox is engaged, and then push the shift control lever back to the middle “0”
position, pull it along the middle operation direction until it is flush with the "1/2" position, and then
push the shift control lever to the "1/2" position. At this time, the gearbox is in the "1 gear" position.
(if the shift control lever is pushed to the "high and low gear" before entering the gear, and the
operation is carried out according to the above steps, the transmission will be in the "2 gear"
position.) Attention: step on the clutch before shifting.
2.1.2.The gearbox of this machine has 6 forward gears and 2 reverse gears; "low gear" corresponds
Clutch pedal
Sterring wheel
Pipeline controller
Front headlamp
Boom locking handle
Foot brake pedal
Headlamp switch
Accelerator pedal
Hydraulic multi
way valve
Parking brake
Speed control lever
Low gear
Reverse gear 1/2
5/6 Gear
High gear
1/2 Gear
3/4 Gear
