manualshive.com logo in svg

JUMPtec superMOPSpro, Техническое руководство

Поделиться
Скачать
JUMPtec superMOPSpro Скачать руководство пользователя страница 54

Network Operation

super

MOPS

pro

Copyright 

JUMP

tec

 

Industrielle Computertechnik AG

Page: 54 of 93

16) The next step is to select the appropriate protocols to bind to the adapter for your network

environment. When prompted, install the protocol options and and utilities required for your
network. (If not prompted, use the "Add Software" and then the "Bindings" option from the
"Network Settings" dialog.)

 
17) Restart Windows NT when prompted for all changes to take effect.

MS LAN MANAGER DOS AND OS/2

This procedure assumes that MS LAN Manager 2.X is already installed on the target system.  If not,
do so now. Refer to the "Microsoft LAN Manager Installation and Configuration Guide" for
instructions.

1) Start the LAN Manager Setup program and select "Configuration".
 
2) Select "Network Drivers".
 
3) Select the installed configuration you want to update.  If the configuration list is empty, select

"Add New Config".

 
4) From the "Network Adapter Drivers" window, select "Other Driver".
 
5) When prompted, insert the "CS8900 Setup and Device Driver Software" diskette in the diskette

drive and press <Enter>.  You do not need to enter path information.  The diskette is configured
to enable the Setup utility to find the required files.

 
6) Select "Crystal LAN(tm) CS8900 Ethernet Adapter" and then "OK".
 
7) From the "Network Protocols" window, select the appropriate protocol(s) for you network

environment. Typically, this will be the NetBEUI driver (required for NetBIOS support).

 
8) Follow the instructions in the window to complete the configuration.  Your AUTOEXEC.BAT,

CONFIG.SYS, and PROTOCOL.INI files will be updated.

 
9) Restart the computer to load the NDIS 2.0.1 and protocol drivers.

Содержание superMOPSpro






























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды