JUMO dTRON 16.1 B 70.3011, Руководство по эксплуатации

Страница: 9 / 56

3
In
sta
lla
tio
n
7
3.2 Fitting in position and removing the controller chassis
h
Fit the seal provided onto the instrument
housing
h
Insert the controller from the front into the
panel cut-out.
h
From the back of the panel, push the
mounting frame onto the instrument
housing and press it against the back of
the panel, compressing the springs, until
the latches snap into the notches provided
and it is securely fixed in position.
h
Press together the knurled areas (top and
bottom) on the front panel and pull out the
controller chassis.
3.3 Cleaning the front panel
The front panel can be cleaned with the usual wash and rinse agents and cleaners. It has a limited
degree of resistance to organic solvents (e. g. petrol, benzene, P1, xylene and similar). Do not use
any high-pressure cleaners.
Seal