JUMO dTRON 16.1 B 70.3011, Руководство по эксплуатации

Страница: 16 / 56

5 O
p
e
rati
o
n
14
5.3 Entering setpoints and parameters
Parameters and setpoints are input and altered by continually altering the value. The change
speeds up the longer the key is held down.
h
Increase the setpoint (parameter) with
I
h
Decrease the setpoint (parameter) with
D
The setpoint (parameter) is accepted automatically after ap-
prox. 2 sec; display flashes briefly
h
Abort the input with
X
The value alters only within the permitted range of values.
v
Section 6.2 (setpoint limits)
5.4 Entering the configuration codes
h
Select the digit with
D
(digit flashes!)
h
Alter the value with
I
h
Confirm the code with
P
or
abort the input with
X
Example: Altering the setpoint
in
standard display