8
Easytech - planting
SYSTEM OVERVIEW
1 - SYSTEM OVERVIEW
ATTENTION:
The Easytech system installation in the tractor must be performed by qualified and trained personnel.
The
Easytech
controller is a Planter/Fertilizer management system, it has many other complimentary func
-
tions that assist and facilitate operations in the field.
1.1 - Easytech Controller Functions
- Fixed rate control Seed;
- Fixed rate control Manure;
- Pneumatic springs control (optional);
- Seed monitoring row per row;
- Manual Power Off of Machine Section A or B (combine);
- Brachiaria Rate Checking Procedure;
- Speed indicator;
- Seeds deposit volumetric reference;
- Manure seeds deposit volumetric reference;
- Hour meter;
- Hectare meter;
- Operational yield report;
- Planting excessive speed warning;
- Operational non-compliance warning.
2 - INSTALLING THE EASYTECH
Make sure that all the electronic components and cables are properly secured and away from the machine
moving parts that might damage them. Cables can not be cut, twisted or excessively bent because the system can
present failures.
2.1 - Electrical Installation
1st Step: Identify the power cable C1 and connect it in the tractor’s battery positive and negative poles;
2nd Step: Connect the battery cable C1 to the output cable of display MD3;
3rd Step: Connect the implement cable in the two outputs remaining of the cable in the display.
ATTENTION:
For the Easytech system perfect operation, it is necessary that the tractor has a hydraulic output specific
for the transmission hydraulic motors with nominal continuous flow of
35 L/min for single machines and 70 L/
min for combine machines
. In addition, there is still also the flow designed to the vacuum turbines, in the case
of Pneumatic distributors (Exacta System) more the demand for the hydraulic lifting pistons and marker arms.
