ENGLISH
20
2.
Fit the brush nozzle or angled nozzle.
Push the nozzle you want to use onto the nozzle holder (see fig. 3) and
press it in place. The nozzle holder and nozzle can be fitted in the
required direction. You can start by fitting the long nozzle and then fit the
round brush nozzle or the angled nozzle on top of the long nozzle. Fit the
long nozzle in the same way as the brush nozzle. The round brush
nozzle and the angled nozzle are fitted in the same way as the nozzle
holder.
3.
Fitting the door/window nozzle.
Fit the brush nozzle on the nozzle holder (see fig. 4 and 5). Attach the door/window nozzle's two small
hooks on the brush nozzle mounts, fold out the large hook on the door/window nozzle and press the door/
window nozzle on the brush nozzle.
Filling with water during use
1.
Unplug the power cord.
2.
Press the steam control until steam no longer comes out.
3.
Release the safety cap slowly, but let it remain in place until steam no longer comes out. Place the
appliance in a cool place for about five minutes to cool down. Then remove the safety cap fully.
4.
Use the funnel and measuring jug to fill the reservoir with cold or warm water.
5.
Refit the safety cap and tighten it firmly.
After use
1.
Unplug from the power outlet when the appliance is not in use.
2.
Press the steam control until steam no longer comes out.
3.
Release the safety cap slowly, but let it remain in place until steam no longer comes out. Place the
appliance in a cool place for about five minutes to cool down. Then remove the safety cap fully.
4.
Empty the reservoir and dry the appliance with a dry cloth.
5.
Refit the safety cap and tighten it firmly.
