JUKI SC-921 Скачать руководство пользователя страница 41

Страница: 41 / 50

11. Setting of the auto lifter function

1) Turn ON the power switch with

switch

❺

held pressed.

2) "FL ON" is displayed on indicators

Ⓐ

and

Ⓑ

with a blip to make the

auto lifter function effective.

3) Turn OFF the power switch, and turn

ON the power switch again to return
to the normal mode.

4) Repeat the operation 1) to 3), and

LED display is turned to (FL OFF).
Then, the function of auto-lifter does
not work.

❻

❺

❹

❸

❶

Ⓑ

Ⓐ

❷

❼

FL ON : Auto-lifter device becomes effective. Selection of the auto-lifter device of solenoid drive (+33V)

or of air drive (+24V) can be performed with

switch

❻

(Changeover is performed to drive power +33V or +24V of CN37.)

FL OFF : Auto-lifter function does not work. (Similarly, the presser foot is not automatically lifted when pro-

grammed stitching is completed.)

Solenoid drive display (+33V)

Air drive display (+24V)

(Caution) 1. To perform re-turning ON of the power, be sure to perform after the time of one second or

more has passed. (If ON / OFF operation of the power is performed quickly, setting may
be not changed over well.)

2. Auto-lifter is not actuated unless this function is properly selected.

3. When “FL ON” is selected without installing the auto-lifter device, starting is momentarily

delayed at the start of sewing. In addition, be sure to select “FL OFF” when the auto-lifter
is not installed since the touch-back switch may not work.

WARNING :

When the solenoid is used with the air drive setting, the solenoid may be burned out. So, do not

mistake the setting.

When the auto-lifter device (AK) is attached, this function makes the function of auto-lifter work.

– 39 –

Содержание SC-921



















































Результаты поиска

Содержание SC-921

Отзывы:

Похожие инструкции для SC-921

Бренды по названию

Популярные бренды

JUKI SC-921, Инструкция по эксплуатации

Результаты поиска

Содержание SC-921

Отзывы:

Похожие инструкции для SC-921

Бренды по названию

Популярные бренды