JUKI SC-921, Инструкция по эксплуатации

Страница: 26 / 50

7. Function setting list
No Item Description
Setting
range
Indication of function setting
Ref.
page
1 Soft start
function
The number of stitches to be sewn at a low speed when the soft-
start function is used at the start of sewing.
0 : The function is not selected.
1 to 9 : The number of stitches to be sewn under the soft-start
mode.
0 to 9
(Stitches)
1 0 28
2 Material end
sensor function
Material end sensor function (to be used only with CP-18).
0 : Material end detection function is not operative.
1 : After detecting material end, the specified number of stitches
(No. 4) will be sewn, and the sewing machine will stop.
0/1 2 0 28
3 Thread trimming
function by
material end
sensor
Thread trimming function by material end sensor (to be used only
with CP-18).
0 : Automatic thread trimming function after detection of material
end is not operative.
1 : After detecting material end, the specified number of stitches
(No. 4) will be sewn, and the sewing machine will stop and
perform automatic thread trimming.
0/1 3 0 28
4 Number of
stitches for
material end
sensor
Number of stitches for material end sensor (to be used only with
CP-18).
Number of stitches from detection of material end to stop of the
sewing machine.
0 to 19
(Stitches)
4 5 28
5 Flicker reducing
function
Flicker reducing function
0 : Flicker reducing function is not operative.
1 : Flicker reducing function is effective
0/1 5 0 28
6 Bobbin thread
counting
function
Bobbin thread counting function
0 : Bobbin thread counting function is not operative.
1 : Bobbin thread counting function is operative.
0/1 6 1 28
*
7 Unit of bobbin
thread counting
down
Unit of bobbin thread counting down
0 : 1 Count/10 stitches
1 : 1 Count/15 stitches
2 : 1 Count/20 stitches
3 : 1 Count/thread trimming
0 to 3 7 0
*
8 Number of
rotation of
reverse feed
stitching
Sewing speed of reverse feed stitching
150 to 3,000
(sti/min)
8 1 9 0 0
9 Thread trimming
prohibiting
function
Thread trimming prohibiting function (to be used only with CP-18).
0 : Thread trimming is effective.
1 : Thread trimming is prohibited.
(Output of solenoid is prohibited. : Thread trimmer and wiper)
0/1
9 0
28
10 Setting of
needle bar stop
position when
the sewing
machine stops
Position of needle bar is specified when the sewing machine
stops.
0: The needle bar stops at its lower position.
1: The needle bar stops at its upper position.
0/1 1 0 0 28
11 Operation
confirmation
sound for
operation panel
Operation confirmation sound for operation panel
0 : Operation confirmation sound is not generated
1 : Operation confirmation sound is generated.
0/1 1 1 1 28
12 Optional
switch function
selection
Switching of function of optional switch.
Refer to “III-8. Detailed explanation of selection of functions”
p.28 .
1 2 o P T _ 29
*
13 Function of
prohibiting start
of the sewing
machine by
bobbin thread
counter
Function of prohibiting start of the sewing machine by bobbin
thread counting
0 : When counting is out (-1 or less) Function of prohibiting start
of the sewing machine is not operative.
1 : When counting is out (-1 or less) Function of prohibiting start
of the sewing machine after thread trimming is operative.
2 : When counting is out (-1 or less), the sewing machine stops
once. Function of prohibiting start of the sewing machine after
thread trimming is operative.
0 to 2 1 3 0
14 Sewing counter Counting function of sewing (number of completion of process)
0 : Sewing counter function is not operative.
1 : Sewing counter function is operative. (Every time thread trim-
ming is performed)
2 : With the sewing counting switch input function
0 to 2 1 4 1 32
15 Thread wiping
function after
thread trimming
Thread wiping operation after thread trimming is specified.
0 : Thread wiping is not carried out after thread trimming
1 : Thread wiping is carried out after thread trimming
0/1 1 5 1
21 Function of
automatic
presser foot
lifting at pedal's
neutral position
Function of lifting presser foot when the pedal is in neutral position.
0 : Function of neutral automatic presser lifting is not operative.
1 : Selection of function of neutral presser lifting. 0/1 2 1 0 32
22 Needle up/
down correction
switch
changeover
function
Function of the needle up/down correction switch is changed over.
0 : Needle up/down compensation
1 : One stitch compensation 0/1 2 2 0 32
25 Thread trimming
operation after
turning the
handwheel by
han
Thread trimming operation after moving the needle away from its
upper or lower position by turning the handwheel by hand is speci-
fied.
0 : Thread trimming operation is carried out after turning the
handwheel by hand
1 : Thread trimming operation is not carried out after turning the
handwheel by hand
0/1
2 5 1
* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the time of
delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated. If it is necessary to
change the set value, please purchase the Engineer’s Manual and follow the instructions.
– 24 –