JUKI MO-50eN, Инструкция по эксплуатации

Страница: 24 / 46

A
B
4
1
6
5
- Place the spool on the
spool holder pin.
- Bring thread up through guide (1).
- Pull the thread under the
protector (2) and pass under the
guider up to go around the
pre-tension (3).
- Thread guide (4,5).
- Thread left needle eye (6)
- Place thread under presser foot.
Note:
If the lower looper has to be re-
threaded, cut both needle threads off
at the needle eye and remove
surplus thread from below. Thread
the looper and then re-thread the
needles.
When threading is complete, lower
the presser foot and close the
looper cover and cloth plate.
Left needle (Yellow)
After threading
Threading
2
3
4
23