– –
• When filling the oil tank with the oil initially, make sure that the oil amount
indicating rod works. When it does not work at this time, make it work by tilting the
sewing machine once.
• When you use a new sewing machine or a sewing machine after an extended period
of disuse, use the sewing machine after performing break-in at 3,000 sti/min or less.
• For the oil for hook lubrication, purchase JUKI New Defrix Oil No. 1 (Part No. :
MDFRX1600C0).
• Be sure to lubricate clean oil.
Fll the ol tank wth ol for hook lubrcaton before
operatng the sewng machne.
) Remove ol hole cap
1
and fill the oil tank
wth JUKI New Defrx Ol No. usng the oler
suppled wth the machne.
2) Fll the ol tank wth the ol untl the top end
of ol amount ndcatng rod
3
algns wth
the upper engraved marker lne of ol amont
ndcatng wndow
2
.
If the oil is filled excessively, it will leak from
the ar vent hole n the ol tank or proper
lubrcaton wll be not performed. So, be
careful.
3) When you operate the sewing machine, refill
ol f the top end of ol amount ndcatng rod
3
comes down to the lower engraved marker
lne of ol amount ndcatng wndow
2
.
WARNING :
1. Do not connect the power plug until the lubrication has been completed so as to prevent
accidents due to abrupt start of the sewing machine,
2. To prevent the occurrence of an inflammation or rash, immediately wash the related portions if
oil adheres to your eyes or other parts of your body.
3. If oil is mistakenly swallowed, diarrhea or vomitting may occur. Put oil in a place where children
cannot reach.
3
2
2
1
Upper engraved
marker line
Lower engraved
marker line
4. PREPARATION OF THE SEWING MACHINE
4-1. Lubrication
When bringing the machine into use, the oil quantity in the oil tank will decrease
until the circulation filter is filled with oil. When the top of the oil quantity indicating
bar goes down under the lower engraved marker line, add oil again so that the
indicating bar rests in the range between the upper and lower engraved marker
lines.