– 46 –
Register parameters which are frequently used with parameter register key and use them.
Parameters which have been registered can be selected by pressing only the parameter register key
under the input mode.
(1) Method of register
1) Set the mode to the input mode.
Under the input mode where SET READY LED
goes out, parameter registration is enabled.
If the current mode is the sewing mode, press
READY key
❷
to change over the mode
to the input mode.
2) Call parameter register screen.
Press MODE key
❹
to display the mode
screen. Select the parameter key registration
on this screen. Then, the parameter registration
screen
A
is displayed.
When you press EDIT key
❽
on the screen,
the parameter registration key setting screen is
displayed.
The parameter registration key setting screen
can also be displayed by keeping the parameter
registration key you want to edit held pressed.
3) Select parameter.
Item
B
which can be registered to the key is displayed. Press ITEM SELECT key
❻
to select the
item to be registered.
Items which can be registered are sewing data, parameters of memory switches (level 1) and pattern Nos.
In addition, when trash can is selected, register can be released.
4) Start register.
When READY key
❷
is pressed, registration starts, and the screen returns to the mode screen.
When RETURN key
❾
is pressed, the screen returns to the previous screen without performing
registration.
(2) Register status at the time of your purchase
16. Using parameter register key
Register key
Registered parameter
F1
Changeover of single/double stitching
F2
Basting (off/number of times)
F3
Basting needle thread tension setting
F4
Plural motions of cloth cutting knife
Ineffective/effective
F5
Cloth cutting knife size
A
B
❽
❻
❾
❷
