JUKI IT-100, Инструкция по эксплуатации

Страница: 42 / 85

– 39 –
1 2
6
4 5
3
7
8
4 5
3
4-12. function setting
Functons of the sewng machne can be programmed and the number of sttches and the sewng speed can
be changed.
Refer to the Instructon Manual for the SC-920 for how to change the functon settng tems and for the detals
of the functons.
) Keepng swtch
1
held pressed, turn the
power ON. Then the screen s changed over
to the functon settngs lst screen.
When you press swtch
2
, the screen s
changed over to the functon settng dsplay
screen.
The function setting list screen can be
displayed from the information screen
(maintenance personnel level). Refer
to
"
$
-2. MAINTENANCE pERSONNEL
LEvEL" .
[function settings list screen]
2) Functon settng tem number can be ncre-
mented or decremented by pressng swtches
3
and
4
.
3) Once you have determned the target functon
settng number, press swtch
5
. The screen
s changed over to the functon settng popup
screen.
[function setting display screen]
4) Functon settng tem number can be ncre-
mented or decremented by pressng swtches
6
and
7
.
5) Once you have completed set value changng,
press swtch
8
. The screen s changed over
to the functon settng dsplay screen and the
changed set value s dsplayed on the screen.
) Turn OFF the power swtch to ext from the
functon settng.
* To change two or more dfferent functon
settng numbers, repeat the aforementoned
steps of procedure 2) through 5) as requred.
[function setting popup screen]
f u n c t i o n
setting No. Set value
Example) �To change the number of sttches 0 to 3 usng the soft-start functon (functon settng No. )�
) Press swtches
3
and
4
to select functon
settng No. .
2) Press swtch
5
. The screen s changed over
to the functon settng popup screen.
[function setting display screen]