– 53 –
ENGLISH
The re-sewing switch is used when the bobbin thread runs out during the corner pattern sewing step or the step
pattern sewing step. Explanation of the re-sewing switch is given using the corner pattern as an example.
1) When the bobbin thread has run out during the sewing
of a corner
a
, take the position at which you have
noticed run out of the bobbin thread as
b
. Bring the
pedal to its neutral position to allow the sewing
machine to stop.
2) Depress the back part of the pedal to perform thread
trimming.
3) Press re-sewing switch
1
.
c
4) Replace the bobbin with a new bobbin and sew over the
finished seam.
d
5) Depress the front part of the pedal and continue to depress
the pedal until the stop position of the current step.
6) When re-sewing switch
1
is turned ON again at the stop
position, the step is changed over to the subsequent step,
and the corner pattern can be continued.
*
When thread breakage or the like occurs during the free
stitching operation
d
using re-sewing switch
1
, set the
pedal to neutral and perform thread trimming operation by
depressing the back part of the pedal. Perform threading and
slightly return the material edge. Then press re-sewing
switch
1
and the free stitching can be continued. After this,
the operation is the same as steps 5) and 6).
When returning to the first step without
using re-sewing switch
1
, the step
display returns to “1” and the sewing can
b e p e r f o r m e d f r o m t h e f i r s t b y
depressing the back part of the pedal to
perform thread trimming.
1
C
b
a
d
5-5. Re-sewing switch
Cau tion
Содержание IP-100
Страница 1: ...ENGLISH ...
