– 12 –
1) Confirm that step 1 is displayed on the panel. Now, set the number of stitches to 20 using switches
笆
and
笳
.
2) Set the feeding direction to the normal direction using switches
笘
and
笙
.
3) Set the stop state of the sewing machine to the needle-down stop mode using switches
笞
and
笵
.
4) Set the position of the presser foot, when the sewing machine stops, to the upper stop position using switches
笨
and
笶
.
(If you want to specify, in particular, the length of time during which the presser foot is raised, set it as desired
using switches
筐
and
筺
. If you do not specify the length of time during which the presser foot is raised, it will
be automatically set to 60 seconds.
Possible setting range of the time during which the presser foot is raised : 0.1 sec. to 99.9 sec.)
If the number of stitches is set to 0 stitch or the stop-state of the sewing machine is set to
the automatic thread trimming mode
, the machine will not proceed to the subsequent
operation step.
[Step 2]
5) Press switch
笄
once to display step 2.
6) Set the number of stitches to 10 using switches
笆
and
笳
.
[Step 3]
7) Set the feeding direction to the normal direction, the stop-state of the sewing machine to the needle-down
stop mode and the position of the presser foot to the upper stop position as in the case of step 1.
8) Press switch
笄
once to display step 3.
9) Set the number of stitches to 20 using switches
笆
and
笳
.
10) Set the feeding direction to the normal direction, the stop state of the sewing machine to the needle-down
stop mode and the position of the presser foot to the upper stop position as in the case of steps 1 and 2.
Cau tion
Cau tion
Setting with switches
8
and
9
, or
!0
and
!1
is possible only in the state that the use of
auto lifter can be performed (FL ON). It is possible to change over FL ON / OFF by turning
ON the power while pressing UP switch of the control box.
3
笄
2
笄
2
3
Содержание IP-100
Страница 1: ...ENGLISH ...