JUKI ASN-690, Инструкция по эксплуатации

Страница: 20 / 50

– 7 –
1
2
4
3
) Adjust the pressure of the presser foot by loos-
ening first nut
4
and turnng presser foot adjust
screw
1
.
When the adjust screw s turned clockwse, the
pressure wll ncrease. When t s turned coun-
terclockwse, the pressure wll decrease.
After the adjustment, be sure to turn nut
4
wth-
out fal.
) To open presser foot
2
sdewayd, rase the
needle to the hghest poston of ts stroke and
lower presser bar lftng lever
3
.
) Slowly turn the handwheel as you keep depress-
ng pushbutton
1
, and you will find a point at
whch the pushbutton goes n farther.
) Wth the above condton mantaned, algn the
desred scale mark on the handwheel wth mark
2
on the belt cover.
3) Reset the pushbutton
1
after settng the dal.
1
2
4-5. Adjusting the stitch length
CAUTION :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the fol-
lowing work after turning the power off and ascertaining that the motor is at rest.
To carry out adjustment, remove the cloth
plate in advance.
4-4. Adjusting the pressure of the presser foot and removing the presser foot