– 41 –
①
Display the sewing screen.
Display the data input screen (blue) and press READY key
A
. Then the back-light of LCD changes to green and
sewing is possible. When the work clamp is in its upper posi-
tion, the work clamp first comes down to its lower position and
then moves to the sewing start point.
Be careful not to get your fingers caught between the
work clamp and the throat plate.
④
Proceed stitching with the presser lowered.
The sewing shape is displayed at the center of the screen. The
current point, sewing start position and sewing end position
are respectively represented by (pink circle), (blue dot) and
(pink dot).
Check the sewing shape using ONE-STITCH BACKWARD but-
ton
C
and ONE-STITCH FORWARD button
D
.
When two or more commands have been entered, the feed po-
sition does not change but the command display
A
is moved for-
ward and backward. When you keep pressing the ONE-STITCH
FORWARD or BACKWARD button, the moving speed increases.
When the COMMAND SEARCH FORWARD button
E
is pressed, the feed automatically moves to the sewing end
position. When the COMMAND SEARCH BACKWARD button
F
is pressed, the feed automatically moves to the sew-
ing start position.
To stop the feed, press button
C
,
D
,
E
,
F
,
G
or
H
.
When INTERMEDIATE PRESSER button
G
is pressed,
the intermediate presser is raised or lowered. (This button is
not displayed when MEMORY switch
is set at 0 (zero).)
Changeover of the needle is executed by moving the feed until
the needle changing position is passed through. (In the case
the color change mode is the manual changeover mode, the
feed does not move when the feed and needle-changeover
interlock function of the memory switch is disabled.)
The needle for sewing at the current point is displayed on
B
(Right needle
, left needle
).
The sewing machine does not start even when the foot
switch is depressed with this mode.
②
Display the step sewing screen.
When STEP SEWING button
B
is pressed, the step
sewing screen is displayed.
③
Lower the presser with the foot switch.
WARNING :
Make sure without fail of the contour of the sewing pattern after selection of the sewing pattern.
If the sewing pattern extends outside the work clamp feet, the needle will interfere with the work
clamp.
2-9. Checking pattern shape
A
B
A
B
C
D
G
E
F
H
