JUKI AMB-289/IP-420, Инструкция по эксплуатации, Страница: 9 / 33

Ⅰ–6
(2) Connecting the power source cord
1) Voltage specifications
1. Never use under the wrong voltage and phase.
2. When changing the voltage, refer to the item of "Changing the voltage of 100 / 200V".
2) Connecting single phase 200V, 220V, 230V and 240V
Connect so as to supply the power to the white wire and the black wire as shown in the illustration.
3) Connecting three phase 200V, 220V and 240V
Power source specifications are indicated on the
voltage indication seal. (3-phase type only)
For other type machines, power source
specifications are indicated on the voltage caution
seal and the rating label.
Connect the cord in accordance with the
specifications.
Voltage indication seal
(3-phase type only)
Rating label
Voltage caution
seal
Table
Brown
Brown
Brown
Light blue Light blue
Light
blue
Green/Yellow
Green/
Yellow
Control box
Green/Yellow
Plug
Power source cord
Power switch
GND
AC200 V
AC220 V
AC230 V
AC240 V
Table
Red
Black
Green/Yellow
White
Control box
Power source cord
Plug
Power switch
GND
AC200 V
AC220 V
AC240 V
Green/Yellow
Black
Red
White
Green/
Yellow
Red
Black
White