JUKI AMB-289/IP-420, Инструкция по эксплуатации, Страница: 16 / 33

Ⅰ–13
1) Fix base
1
on the table with wood screw
2
.
2) Insert button tray
4
in the hole of base
1
and fix it with setscrew
3
after adjusting
the position to that where the button can be
taken with ease.
It is possible to change the loader set
position as well. It is recommended
to perform positioning them together.
(Memory switch
)
(12) Installing the thread stand
1) Assemble the thread stand, and set it in the
hole in the top right corner of the machine
table.
2) Tighten locknut
1
to fix the thread stand.
3) When ceiling wiring is possible, pass the
power cable through spool rest rod
2
.
(13) Attaching the button tray
1
2
4
3
1
2