juju Total 360, Руководство пользователя

Страница: 16 / 47

Page 1 6
8 .3. Locate the ISOFIX arms in the base of the seat.
8 .4. Place the seat in the back seat of the vehicle in the opposite direction of travel.
8 .5. Hold the safety seat with both hands and insert the two ISOFIX arms firmly
into the vehicle's ISOFIX anchoring points until they fasten with a click on both
sides. The red button will change to green on both sides.
8 .6. Shake the seat to check that it is correcUy anchored to the vehicle's ISOFIX
points .
8 .7. Pull out the Top Tether and press the tether strap release button to
extend the strap until it is long enough to connect it to the Top
Tether anchorage point In the vehicle.
If the Top Tether is tightened favorably and correctly, the button will change to
green.
8 .8. Make sure the 5-point harness of safety seat has been correctly
installed (see section 5 )
8 .9. Open the buckle, put the shoulder harness to the sides, then put
the child into the safety seat.
Please check If shoulder harness height is equal to your child's shoulder height,
press the adjusting device and pull the shoulder harness to be loose, then press the
headrest handle to adjust the shoulder harness to the suitable position.
8 .10. Slide the two tongues together Into the buckle. The buckle will not work well till
you hear "click". Adjust the child restraint belt to make sure the lap belt is well
restrained the child's pelvis. Then tighten the shoulder straps by pulling the
adjustable strap at the front of the bottom cushion.
8 .11. If you want to release your child from the safety seat, press the
adjusting device at the front of the bottom, at the same time pull
the shoulder straps. Then press the red button on the buckle,
place the shoulder straps at the side and let your child out.
Uninstalling the ISOFIX system:
1.To free the Top Tether, press the button and pull the tether strap in the opposite
direction{the indicator will change from green to red color), in order to take off the
top tether.