juju Total 360, Руководство пользователя

Страница: 18 / 47

Then tighten the shoulder straps by pulling the adjustable strap at the front of the
bottom cushion.
9 .11. If you want to release your child from the safety seat, press the adjusting
device at the front of the bottom, at the same time pull the shoulder straps. Then
press the red button on the buckle, place the shoulder straps at the side and let
your child out.
Page 1 8
Note:
Use backrest rotating handle to swivel the seat 180° for forward facing installation,
backrest hanger and L-backrest hanger are hooked each other. -
Pic 13
Uninstalling the ISOFIX system:
1.To free the Top Tether, press the button and pull the tether strap in the opposite
direction(the indicator will change from green to red color), in order to take off the
T op tether.
2.To free the ISOFIX anchoring, press backwards the ISOFIX System unlock buttons
(the indicator will change from green to red color), in order to free the seat from
the vehicle ISOFIX anchoring system.
10. GROUP 2/3(15 to 36kg) Install Forward Facing:belt+Fix
or belt only
For belt+Fix, please refer to 10.1-10.9.
For belt only, please refer to 10.1-10.5, then turn to 10.8-10.9.
1 0 .1. Ensure that the child seat's 5-point harness and buckle is removed
correctly( see section 3 )
1 0 .2. Ensure the seat is ready to install in forward facing (Group 2/3), pull the
backrest reclining handle to adjust to angle to position 1, 2 or 3, then release the
handle.
1 0 .3. It is necessary swivel the seat 180° to place the seat in the direction of travel.
Release the backrest rotating handle when the seat is in the desired position.
1 0 .4. Before installing the safety seat, place your child in the seat and adjust the
headrest to the correct height(see section 7 )