6
7
3. Place the lid on the juice bowl so that the pulp
opening is positioned over the pulp spout. Position
the back of the lid over the edges of the pulp spout
first; then lower the lid to fit firmly against the base
(D).
4. Center feed chute over lid opening so that the
safety lock hook on the feed chute is slightly to the
left of the arrow on the lid. Insert three tabs located
around bottom of the feed chute into the three slots
on the lid. Turn counterclockwise until the safety
lock hook on feed chute aligns with the arrow on
the lid (E).
5. Engage the lid locking lever with the safety lock
hook on the feed chute (F). You should hear a click
as it locks in place.
Important: Your juice extractor will not operate if the
lid locking lever is not properly locked.
6. Tilt the pulp basket slightly and place it directly
beneath the pulp opening. Push the bottom of pulp
container in so top edge slides up behind the pulp
spout. Continue to press firmly on the bottom of the
pulp container until it fits snugly against the base
(G). When correctly positioned, pulp container will
be completely covered by the pulp opening in the
lid.
Tip: To make cleaning easier, you may wish to line the
pulp container with a scrap bag or small trash bag to
catch the pulp as you juice.
Important: Your juice extractor will not operate unless the pulp container is
correctly placed.
7. Place the froth separator into the juice pitcher.
Position the pitcher beneath the juice spout (H).
8. Keep the food pusher in the feed chute until
you are ready to juice. To insert, rotate the food
pusher until the groove on the food pusher is
properly aligned with the ridge in the feed chute
(J).
DISASSEMBLING YOUR JUICE EXTRACTOR
Important: Always make sure your juice extractor is unplugged before
starting to assemble.
1. Remove food pusher from feed chute.
2. Press down on safety lock button, swing lid
locking lever away from feed chute. Release
safety lock button (K).
D
E
F
G
H
J
K
ENGLISH
