EMERGENCY STOP
PROTECTION FUNCTION
AUTOMATIC TAKE-OFF AND LANDING
MANUAL LANDING
“Emergency stop”
button
ATTENTION
If the drone during flight, collides with an object, or if you
need to stop quickly, press the “emergency stop” button.
See image on the left. If you are in flight and the engines
stop, the drone will fall on the ground, so do not use it if
it is not strictly necessary.
If the drone crashes into an obstacle and falls, the current is cut off automatically to protect
motors. To reset the control, lower the power lever to maximum (center image) and then lower
both levers and out (right image) to unlock the drone and return to fly normally.
Automatic takeoff: After pressing the button, the drone rises to reach 1 meter reference height.
While rises, the drone´s lights flash slowly and remain on when it reaches the height informed.
Automatic landing: After pressing the button, the drone slowly goes down to land on the grou-
nd. While going down, the drone`s lights flash slowly and remain on for 3-5 seconds after
complete landing.
During the manual landing, lower the left lever slowly to
the drone lands slowly and gently.
Automatic takeoff
Automatic landing
In automatic takeoff the drone
always rises to up to 1 meter high,
regardless of the altitude at which
we are at.
1 meter
1 meter