11
PRACTICE FLIGHT
RESOLUTION PROBLEMS
Practice until have drone control, follow the flight instruction below:
Take off the drone and try to keep it as steady as possible at a certain height (remember that
must be greater than 30cm to avoid ground effect). This type of flight is called stationary flight.
Now turn the drone on itself (image 1) in both directions, avoiding as much as possible that
the drone to destabilize. Start with gentle movements. This type of flight is called rotary flight.
Next, try to move forward, backward (image 2) and move laterally to both directions (image 3),
while avoiding the drone to destabilize. Start with gentle movements. This type of flight is known
as displacement flight.
Finally, landing (image 4). Lower the power lever smoothly and accurately so that the drone
move downward slowly. When you’re close to reaching the 30m, lower the lever more quickly
so that the landing is stable.
Image 1
Image 2
Image 3
Image 4
PROBLEM
CAUSE
SOLUTIONS
The control does
not work
The control is off
Connect the control
Incorrect installation of the bat-
teries
Put the batteries according to the
correct polarity
Completely exhausted batteries
Replace with new batteries
Failure control
The control is off
Connect the control
The drone’s battery is disconnec-
ted
Connect the battery connector
correctly
There is a lot of wind
Do not fly on days of strong winds,
it can affect the performance and
stability of the drone, and it may
lose control
Failure rise
The propellers spin slowly
Move up the power lever
The drone of the battery is half-
-loaded.
Recharge the battery of the drone
Abrupt landing
Lower power lever very fast
Lower the power lever more slowly
to achieve a softly landing
Drone out of con-
trol
After synchronization, even
though the power lever is not at
maximum, the drone rises very
quickly
The power lever must be raised to
the maximum during calibration
Control coverage exceeded
Optimum control coverage is esti-
mated at 100 meters