Judo QUICKSOFT-DUO JQS-D, Инструкция по установке и эксплуатации

Страница: 4 / 32

4 JUDO QUICKSOFT-DUO
About this Operating Instructions
All the general safety notes given in this
Instruction Manual are to be observed
and carried out safely - Failure to do so
can result in personal injury and / or
property damage. The manufacture
waves all liabilities.
1.1 Symbols used
The safety notes contained in this instruction
manual are labelled with the following
symbols:
,
Notes directly attached to the softener, e.g.
– Direction of flow (see Fig. 2)
– Rating plate
– Cleaning information
must always be observed and kept in a fully
legible condition.
1.2 Safety information and dangers
due to non-compliance
In detail, failure to observe the general
danger symbols can result, for example, in
the following risks:
– Failure of important functions of the
softener.
– Danger to persons due to electrical and
mechanical effects.
– Danger to persons and the environment
due to leaks.
Refrain from any unsafe working methods.
Failure to comply with this instruction
manual and the safety information can not
only result in dangers for people but can
also harm the environment and the unit.
1.3 Units used
In derogation of the International System of
Units (SI = System International), the follo-
wing units are used:
ATTENTION
Notes on existing
dangers
Warning, electrical voltage
Torques specified by the
manufacturer.
Tips for use and other
information.
Fig. 2: Built-in rotary flange
Units Conversion
°F °F = 9/5 °C + 32
1 psi 7 kPa = 0.0069 N/mm²
1" DN 25
1 Grain / US
Gallon = 0.171 mmol/l alka-
line earth ions