9
Paging Using a Desktop Controller and Telephone:
(Telco Module must be installed)
1. Remove
the
Pager
you wish to page from
the
Charger
.
2. The
Pager
will flash and vibrate to confirm it is ready for
use.
3. The
Pager
charge LED will continue to flash, confirming it is
ready to receive a page.
4. Pick up the phone and listen for the dial tone.
5.
Dial the phone number that has been assigned to the
TELCO
Module installed.
6. Listen for a voice message from the telephone that confirms
the
Controller
is ready.
7. Within 8-10 seconds, using the telephone keypad, enter the
Pager
number (up to 4 digits) and press the # button to send
the page.
8. A voice message heard on the phone confirms the message
was sent.
9. Hang up the telephone.
10. The
Pager
will receive a single, one second
vibration (factory setting).
11. See Paging instructions in your
Desktop Controller
manual for more information.
Paging Using a IntelFlex Desktop Controller
with Telco M
o
dule
