11
Lo
os
en
Replacing the Insert:
1. Turn
the
Pager
over.
2. Using a flat blade screwdriver or
equivalent to unlock the clear
plastic cover.
3. Slide the clear plastic cover out.
4. Remove
the
Insert
.
5. Replace with a new
Insert
.
6. Replace and slide the clear plastic
cover into place. When inserted
completely, the cover will “snap” into place.
7. Replace and tighten the screw (do not over tighten).
Inserts:
Inserts
can be professionally printed (call
your JTECH sales representative for more
details).
Material thickness is 0.020” (5.1mm)
maximum.
Replacing the Battery:
1. Batteries that no longer charge properly or have a reduced operating
time can be replaced by the user.
2. If using a
Spring Clip
, it must be removed to access the battery door
screw.
3. Use a #1 Philips screwdriver to remove the screw.
4. Slide the battery door and
Pager Clip
off.
5. Carefully slip a screwdriver tip under the plastic wrapper on the battery
pack and lift the battery out.
6. Unplug the battery connector.
7. Dispose of the Nickel Metal Hydride battery pack at any retail
department or home improvement stores that recycles batteries.
8. Plug the new battery into the
Pager’s
connector.
9. Push excess battery wire into the space next to the connector.
10. Press the battery into the
Pager
compartment.
11. Replace the battery door, clip and screw (do not over tighten).
12. Insert the
Pager
into the
Charger
and fully charge the battery.
Insert Dimensions
4-1/2” (114.3mm)
1-7/8” (47.6mm)
Rep
lacing the Battery
Inser
ts
JTECH
JTECH
JTECH
Tig
hte
n
