6
Charging Pagers:
Pagers
are turned OFF during shipment from JTECH.
When first received,
Pagers
must be charged for a minimum of 3 hours prior
to use. This first charge will also turn ON the
Pagers
for use.
The charging system is two stage, with a fast initial and then final
maintenance charge.
Charging Pagers:
1. Insert
Pagers
into the
empty locations of a
powered (ON)
Charger.
2.
E
ach
Pager’s
LED will light.
3. The LED color indicates charging condition.
Flashing yellow light = Battery charge very low. Charge needed.
Do not use the
Pager
.
Solid yellow light = Charge needed.
Solid green light = OK to use.
4.
Pagers
in use and returned to the
Charger
within 24 hours will fully
charge within three hours.
5.
If not returned within 24 hours, charging time of up to 8
hours may be required to fully charge batteries.
6. When not in the
Charger
, each
Pager
continues to
indicate battery charge condition:
Flashing yellow light = Charge needed.
Flashing green light = OK to use.
Charging and Storing Pagers:
To maintain maximum battery capacity, store
Pagers
in the powered (ON)
Charger
.
If
Pagers
are left uncharged for more than 4
days, it is recommended to disconnect the
batteries until their next use. See
“Replacing the
Battery”
on page 11 for instructions.
If left uncharged for extended periods of time,
Pager
batteries can damage beyond repair and will need to be
replaced.
When charged and stored properly, a battery life of 18-24
months can be expected before replacement is suggested.
Cha
rging and Storing Pagers
Co
nnecting Power to Ch
argers
