JTECH Medical Commander MN084, Руководство пользователя

Страница: 8 / 19

Using the Commander Console
Conventions
This manual adopts the following convention throughout:
Test
Refers to one strength assessment that may include multiple repetitions
and comparisons between the right and left side . For instance, testing
elbow flexion with three repetitions for the right side and three repeti-
tions for the left side is one test .
Exam Refers to multiple tests . For example, testing elbow flexion, elbow exten-
sion, wrist flexion, and wrist extension could comprise one exam .
On/Off Button
Press the “ON/OFF” button once to turn the console on, press it again to
turn the console off . Exams stored in memory are not erased when power
is turned off . Holding the “ON/OFF” button down for two seconds clears
all stored exams . The console shuts off automatically after four minutes of
inactivity .
Note:
Make sure no force is applied to the dynamometer when turning the console on.
When the console unit is turned on it will activate in either “Test” mode or
“Review” mode, depending on whether an exam is stored in memory . If no exam is
stored in memory the console will activate in Test mode ready for test #1 .
ON/OFF
The active “mode,” in this case “TEST,” is displayed in this area.
Test and repetition numbers
are shown here.
Side being tested is displayed on
this line.
Real-time force on dynamometer
can be shown in pounds or new-
tons.
Testing Mode
5