JTECH Medical Commander MN084, Руководство пользователя

Страница: 6 / 19

Check Your System
Your Muscle Tester Commander system should include the following parts:
•
Commander Wrist Unit • Round Pad
• Muscle Tester Dynamometer • Curved Pad
•
Short Cord
•
Testing Chart
•
Long Cord
•
Worksheets
Make sure the serial number on the Muscle Tester, located under the testing pad,
matches the serial number on the Commander Console . If these numbers do not
match, call JTECH Customer Service .
Proper Care
With proper care your new Muscle Tester Commander will provide many years of
worry free use . Do not immerse the dynamometer or the console in water, place in
an autoclave or sterilize with harsh disinfectant . To clean the housings, wipe with a
soft, dry towel . To clean the display, use a non-abrasive dry cloth . Do not use
cleaners . Avoid dropping or banging the instrument or console against hard
objects . Do not stand on, apply more than 125 lb . or use the dynamometer for
anything other than manual muscle testing . Failure to follow these policies will
void the warranty .
Calibration
To ensure accuracy the Muscle Tester and Commander console have been factory
calibrated with weights traceable to the National Institute of Standards and
Technology . When turned on the Commander console automatically zero calibrates
itself . Therefore, make sure the dynamometer test pad is turned up and no force is
being applied when the Commander console is turned on . Any force applied to the
dynamometer when the console is turned on will become the zero value and will
result in inaccurate force readings .
Battery Life
The Commander console uses a standard 9 volt alkaline battery. The estimated
battery life is 28 hours of operation . The Commander console should always be
turned off when not in use to maximize battery life . (The console will automatically
shut itself off after four minutes of inactivity .) NiCad batteries can be used,
however, the active battery life will be reduced to approximately eight hours or
less . When using a NiCad battery, completely drain the battery before recharging
to prevent “memory” in the battery that will further reduce battery life .
3