48
ECP ModeUse DMA
This field is used to select the DMA channel used for the parallel port.
PWR LostResume State
Keep Off
When power returns after an AC power failure, the system’s power is off. You
must press the Power button to power-on the system.
Turn On
When power returns after an AC power failure, the system will automatically
power-on.
Last State
When power returns after an AC power failure, the system will return to the
state where you left off before power failure occurs. If the system’s power is off
when AC power failure occurs, it will remain off when power returns. If the
system’s power is on when AC power failure occurs, the system will power-on
when power returns.
Onboard Serial Port 1, Onboard Serial Port 2, Onboard Serial Port 3 and Onboard Serial
Port 4
3F8, 2F8, 3E8, 2E8
Allows you to manually select an I/O address for the onboard serial
port 1, 2, 3 or 4.
Disabled
Disables the onboard 1, 2, 3 or 4.
Serial Port 1 Use IRQ, Serial Port 2 Use IRQ, Serial Port 3 Use IRQ and Serial Port 4 Use
IRQ
These fields are used to select an IRQ for the onboard serial port 1, 2, 3 or 4.
Serial Port1 Mode
COM 1 functions as either a serial port or IrDA. You cannot use both at the same time.
Normal
This option sets COM 1 as serial port.
IrDA
This option sets COM 1 as IrDA.
USB Controller
This field is used to enable or disable the USB ports.
USB 2.0 Controller
If you are using USB 2.0, this field must be set to Enabled.
USB Keyboard Support
If you are using a USB keyboard under DOS, set this field to Enabled.
USB Mouse Support
This field is used to enable or disable the USB mouse.
Init Display First
This field is used to select whether to initialize the onboard VGA or PCI first when the system
boots.
Onboard/AGP
When the system boots, it will first initialize the onboard VGA.
PCI Slot
When the system boots, it will first initialize PCI.
