manualshive.com logo in svg

JS Automation Corp FA-8653, Руководство пользователя

Поделиться
Скачать
JS Automation Corp FA-8653 Скачать руководство пользователя страница 59

 

58

3.2  Updating the BIOS   

To update the BIOS, you will need the new BIOS file and a flash utility, AWDFLASH.EXE. 

Please contact technical support or your sales representative for the files.   

1.  Save the new BIOS file along with the flash utility AWDFLASH.EXE to a floppy disk.   
2.  Reboot the system and enter the Award BIOS Setup Utility to set the first boot drive to 

“Floppy”.  

3.  Save the setting and reboot the system.   
4.  After the system booted from the floppy disk, execute the flash utility by typing 

AWDFLASH.EXE.The following screen will appear.   

 

5.  Type the new BIOS file name onto the gray area that is next to “File Name to Program” 

then press <Enter>.   

6.  The following will appear.   

Do You Want to Save BIOS (Y/N)   

This question refers to the current existing BIOS in your system. We recommend that you save 

the current BIOS and its flash utility; just in case you need to reinstall the BIOS. To save the current 
BIOS, press <Y> then enter the file name of the current BIOS. Otherwise, press <N>.   

7.  The following will then appear. 

ress “Y” to Program or “N” to Exit 

8.  Press <Y> to flash the new BIOS.   
 

Содержание FA-8653




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды