JRI YJ-390DA, Инструкция по эксплуатации

Страница: 7 / 24

Multi Printer
7
2. Functions
2-
１
General Function Keys
Key Function
"1" (TIME) Sets the time
"2" (DATE) Sets the date
"3" (MODE) Sets the modes
"4" (CODE) Inputs or changes codes (this key does not function in NORMAL
MODE)
"5" (S-TOTAL) Prints subtotals (subtotal number of prints, weights measured, etc.)
"6" (G-TOTAL) Prints totals (Total number of prints, weight measured, max/min values,
range, standard deviation, etc.)
"7" (DELETE) Deletes the last data printed
"8" (FEED) Slides up the printer paper
"9" (TEST) Prints the current printer setting (when power is ON)
"0" (PRINT) Print key (only in MANUAL MODE)
"ESC"
(MENU/Cancel) -Enters the printer setting menu (when power is ON)
-Operates only in Printer Setting mode.
-Clears certain setting(s).
"ENT" (Setting) -Operates only in Printer Setting mode.
-Saves the current setting(s).

TIME/DATE/CODE/FEED/S-TOTAL/G-TOTAL keys can be used while undergoing interface errors.
 By pressing “5” or “6” without measurements, the printer automatically prints out
“SUBTOTAL /TOTAL NO DATA” .

When the number of
measurements reaches 999 and “0” key is pressed, the printer
automatically prints subtotals and totals, and resets the count to 000.
2-
２
General Settings