JRI YJ-390DA, Инструкция по эксплуатации

Страница: 12 / 24

Multi Printer
12
2-
３
Printer Settings
This function is used to configure the printing as well as data communication methods between
the printer and scales/balances.
To access this function, press and hold “ESC” for 2 to 3 seconds when the power is on.
.
(Example)
During the settings,
“1=SERIAL”, “2=VENDER” and “3=MODE” blink in turn on the screen at an
interval of 1 second. Press the
desired setting value (either “1”, “2” or “3”)
-
“1” key: Configures serial communication protocols.
-
“2” key: Selects manufacturers of electronic balances/scales or indicators in use.
-
“3” key: Printer Mode.

Printer Setting Procedure
The following applies to all Printer Settings.
① When a desired item (either “1”, “2”, or “3”) is selected, the value of the selected item
is displayed on the second line of the screen.
②
press
“
▲
”key and “
▼
”key to change the settings. “*” at the right end of the screen
indicates the initial settings when the power was switched on.
③
After the settings, press “ENT” to save or “ESC” to cancel and exit.
④
When the setting is completed, the printer automatically continues to the next setting
menu.
⑤
When the printer setting is completed, turn off the power first and back on again for
use.
ITEM SEL
1=SERIAL