JRI YJ-390DA, Инструкция по эксплуатации

Страница: 11 / 24

Multi Printer
11
2-2-6. Special Functions
To access these functions, press and hold one of the following buttons as shown in the table
when the power is off. Then, turn the power back on while pressing and holding the selected
button.
These functions allow users to access Printer Setting mode, print Printer Set-up Status and print
or select Hex Dump. After completing each function, make sure the power is switched off. However,
after printing Printer Set-up Status, normal operating is possible.
Key Function
(Menu/Cancel) Enters Printer Setting mode
"9" (Test) Prints Printer Set-up Status (Self-Test)
(Set)
(HEX DUMP)
Prints input data in ASCII codes to diagnose the status of
received data.
[ Prints Set-Up Status (SELF TEST) ] [HEX DUMP Print Mode ]
**< HEX DUMP PRINT START >**
53 54 2C 2B 30 30 30 36 30 2E
32 34 20 20 67 0D 0A 55 53 2C
2B 30 30 30 36 30 2E 32 34 20
*[SELF TEST]*
VERSION : V3.10(2014/06/02)
USER MODE : AND
PRINT MODE : MANUAL MODE
PRINT FORMAT : TIME/WEIGHT
PRINT FORMAT2: + PRINT
DATA FORM : FORM1
SUB FORMAT : DEL
LINE FEED : 1 LINE
LANGUATE : KOREA
USER CODE : 000001
TOTAL MODE : TIME PRINT
CODE PRINT : PRINT
NO PRINT : PRINT
INTERFACE : RS-232C Serial
Current Loop
PROTOCOL : 2400bps,E,7,1
CURRENT TIME/DATE :
2014-06-03 17:04:26