JRI SPY IP 4, Руководство пользователя

Страница: 3 / 17

©JRI 3
I. PRESENTATION OF THE SPY IP
1) Presentation
The SPY IP has been designed to monitor and record simultaneously up to 4 different
parameters from either analog, logical, or digital sensors. The device communicates with the
Sirius Operating Software over the Ethernet network.
2) Equipment
1 SPY IP recorder
1 Wall mounting bracket
1 Ethernet cable
1 Power supply for VDC versions
3) Symbols
RECYCLING : do not throw into the household waste bin. Comply with local
regulations for recycling and waste disposal.
POWER SUPPLY : this device is powered with 9VDC-650mA from an 230 VAC
adapter or from the Power over Ethernet connection (POE). Comply with safety
rules regarding electricity. Make sure that the electrical installation complies
with current regulations.
CE MARKING: this device complies with EU legislation for electric security,
inflammability, disturbing radiation emission and immunity to surrounding
electric disturbances
II. INSTALLATION INSTRUCTIONS
1) Location
The SPY IP recorder features a backlit touchscreen. It should be placed:

at approx. 1.5m above the ground in order to be able to see the touchscreen without
difficulties,

in a central position to the measurement points taking into account the length of the
probes,

within reach of a Power Ethernet socket.
Also provide for a power outlet according to safety rules and legislation relatively close to
the powered devices.
Warning:
For use with POE power, the source of this power must be strictly in accordance with
safety requirements.
In general, JRI disclaims all liability with respect to damages arising out of or in connection
with any use other than those recommended in this manual.