ProNav Norway – a
Company
page 15
Rev.1
10.02.2020
Using PocketMax to Communicate with the V200s
,
Continued
Using
PocketMax to
communicate
with the V200s
,
continued
Table 1-3: PocketMax Communication (continued)
Step
Action
4
The Quick Configuration screen allows you to use “PortA”,
“PortB”, and “PortC” tabs to configure the output messages
and baud rates of these two ports.
The Port displaying “[THIS]” is the port currently connected.
“[OTHER]” is the other port. Enable all desired messages for
PortA and PortC.
Use RxConfig to make basic receiver configurations. To exit
the software, click Save Settings and Disconnect. For all
other PocketMax questions, please reference the PocketMax
