JRC NWZ-4610 Скачать руководство пользователя страница 30

Страница: 30 / 120

4-8

4.2.

Basic Operation

4.2.1.

Turning on the power

When the main power is turned on, the power to the display unit is automatically turned on.

In the state in which the power is turned off by the display unit key operation, pressing the

key

turns on the power.

When the main power is OFF

Turning on the main power

When the main power is ON

Turning on the power

Pressing the power key

When the power is ON for first time.
The following screen is displayed. Select a Model with    and press .

                                                    Model

When "LOG" is selected wrong
  Refer to "Caution" in "4.9.2 setting a model".

4.2.2. Starting

(Normal)

If all the self-check results are ‘OK’, the screen is automatically changed to the normal screen.

All OK

If the power cannot be turned on, check the main power of the power distribution board and the
cable connection to the display unit.

Caution

JRC

ENT

Содержание NWZ-4610

























































































































Результаты поиска

Содержание NWZ-4610

Отзывы:

Бренды по названию

Популярные бренды

JRC NWZ-4610, Инструкция по эксплуатации

Результаты поиска

Содержание NWZ-4610

Отзывы:

Бренды по названию

Популярные бренды