JRC JUE-95LT -, Инструкция по эксплуатации

Страница: 31 / 50

3-1
3
CHAPTER 3. OPERATION
Before turning on all power switches of JUE-95LT, confirm all the signal cables and power cables are
connected correctly.
Regarding the details of LED lamp display, switch functions, and connecting cable and connector,
refer table 3-1 to 3-3 in next page.
Because of JUE-95LT is dedicated equipment for LRIT, so its basic operation is simple, only turning
ON and OFF the power switch. Carry out Power ON/OFF with the procedure mentioned below.
3-1 Power on and Log in
Turn ON the power switch of IME, the terminal is logged in to Ocean Region automatically, then
LOG-IN lamp on PANEL is illuminated. (At the first time, it will take maximum 20 minutes to logged in
after powered on. Normally, it will take maximum 3 minutes to log-in.)
3-2 Log out and Power off
Turn OFF the power switch of IME, then the terminal is powered off after it was logged out from
Ocean Region, automatically. (It will take maximum 5 seconds to logged in after powered on.)
3-3 Dimmer
Adjust brightness of LEDs on PANEL , with pushing DIMMER button also on the PANEL.
3-4 Optional EXT. PSU
It provides power supply (DC24V) to optional DTE and printer. Power ON/OFF is available by
turning switch of the front panel.