JRC JUE-95LT -, Инструкция по эксплуатации

Страница: 8 / 50

vi
CAUTION DURING OPERATION
DANGER
Do not touch any internal parts with your hands or tools to avoid danger of electronic shock.
The lithium battery is built into JUE-95LT (EME). Do not short-circuited of the
terminal, do not give the high impact, and wet it to water.
There is danger of exploding.
CAUTION DURING OPERATION
WARNING
Do not bring JUE-95LT (EME) close to the fire, or put it in the fire. It causes the explosion,
generation of heat, and the ignition of a built-in lithium battery.
Do not approach the JUE-95LT (EME) while transmitting, It transmits microwave and strong
microwave might be cause injury.
If a foreign substances, such as metal fragment, water, liquid and etc., are get into your
JUE-95LT, turn off the power, and contact the agent you purchased or JRC branches.
Continuous operation may cause fire, electrical shock or malfunction.
Do not turn on the terminal under the primary power except the specific voltage
(mentioned below).The primary power except the specific voltage may cause fire, electrical
shock or malfunction.
・ DC24V +30 ％、 -20 ％
・
AC100V
～
240V (When EXT PSU, NBD-577C is used)
・
AC100V
～
220V(
±
10%)(When EXT PSU, NBD-843A is used)
Do not check or repair the internal equipment of JUE-95LT by yourself.
Any electrical work by any person other than our specialized maintenance persons may
cause fire or abnormal operation of this equipment or electrical shock for you. This
equipment meets the technical standard of the Ministry of Internal affairs and
Communications (MIC).
Do not adjust the internal circuit or exchange the parts because the internal circuit is
adjusted strictly. When an abnormal operation is found, please contact to out sales
department or nearest branch office.
Do not take apart, and do not remodel the equipment. It causes a fire, the electric shock,
and the breakdown.