JRC JMA-7710-6 Скачать руководство пользователя страница 153

Страница: 153 / 314

3 – 92

3.7

3.7.2 Creating the Navigation Information (Coast Lines and

Contour Lines)

To create a coast line or contour line, a line is drawn in the similar manner as for the navigation line.

Procedures

1. Press the

MARK
MENU

key to select the mark key on the screen and then

select the color using the [COLOR] control.

2. Move the cursor to the start point of the navigation line and press

key. (Use the destination input on the destination input item for the start

point.)

3. Move the cursor to the next turning point and press the

key.

4. Repeat procedure 3.

5. When the end point is reached, press the

key and press the

key twice.

A navigation line will be drawn.

6. If the cursor is moved to the start point, a turning point, or the end point

and the

CLR

key is pressed, the line containing that point will be deleted.

Содержание JMA-7710-6



























































































































































































































































































































Результаты поиска

Содержание JMA-7710-6

Отзывы:

Похожие инструкции для JMA-7710-6

Бренды по названию

Популярные бренды

JRC JMA-7710-6, Инструкция по эксплуатации

Результаты поиска

Содержание JMA-7710-6

Отзывы:

Похожие инструкции для JMA-7710-6

Бренды по названию

Популярные бренды