JRC JMA-3300 Series Скачать руководство пользователя страница 86

Страница: 86 / 298

Chapter 2

OPERATIONS

2.7

SOFT KEY OPERATION

2-40

CAUTION

Use the radar only as a navigation aid.

The final navigation decision must always be made by the operator

him/herself.

Making the final navigation decision based only on the radar

display may cause accidents such as collisions or running

aground.

Use the target tracking function (TT) only as a navigation aid. The

final navigation decision must always be made by the operator

him/herself.

Making the final navigation decision based only on the target

tracking function (TT) information may cause accidents.

The target tracking function (TT) information such as vector, target

numerical data, and alarms may contain some errors. Also, targets

that are not detected by the radar cannot be acquired or tracked.

Making the final navigation decision based only on the radar

display may cause accidents such as collisions or running

aground.

Select TT on the soft key menu.

The soft key menu disappears and "Target Select" of the soft key display is
color-inverted.
"TT" is activated.

Operate with the soft keys.

Soft key 1:

Numerical Data TT Acquisition TT Release

"Numerical Data":

The mode is set to TT numerical data display selection
mode.

"TT Acquisition":

The mode is set to TT acquisition selection mode.

"TT Release":

The mode is set to TT release selection mode

Soft key 2:

Setting/Release

Target tracking data (numerical display) can be set/released.

"TT" is color-inverted.

Содержание JMA-3300 Series











































































































































































































































































































Результаты поиска

Содержание JMA-3300 Series

Отзывы:

JRC JMA-3300 Series, Инструкция по эксплуатации, Страница: 86 / 298

Результаты поиска

Содержание JMA-3300 Series

Отзывы: