JRC JCX-161, Инструкция по эксплуатации, Страница: 15 / 86

Chapter 1 General Outline of Equipment
3
1.2 Features
1.2.1 Versatile functions with standard configuration
1
）
BNWAS function
When dormant period are measured, and the confirmation is not done, warning is output
with the visible display and the alarms according to the sequence of 1.1.3.
2
）
ENERGENCY CALL function
EMERGENCY CALL function can buzz all buzzers with one action push button.
This function is offered without optional equipment.
3
）
Support of bridge alarm and EMERGENCY CALL from BAM transfer function
The bridge alarm and EMERGENCY CALL from BAM can be transfer with the serial
interface that uses the IEC61162-1 ALR sentence.
1.2.2 Various reset devices and number of inputs
1) Reset devices
A maximum of 6 pushbutton reset devices (NCJ-895 and NCJ-896) can be provided so
that the dormant period can be reset within 15 s in anywhere since the visual indication
starts. The reset function is equipped also in the LCD display unit (NWZ-4650).
2) Motion sensor type reset device (option)
The motion sensor (NYG-5) which performs automatic reset by human presence and
motions can be installed.
3) Reset by external navigation equipment
The system supports the reset signal from other navigational equipment. The reset
signal can be input via. an IEC 61162 serial interface or a contact input.
1.2.3 Output to external equipment
1
）
External equipment output by contact output
The system can output the machine statuses or alarm situations to external equipment
by contact output.
2
）
External equipment output by serial output
The system can output machine status or alarm situation to external equipment by the
serial interface using the IEC61162-1 ALR sentence.
1.2.4 Remote maintenance function
When connected with a VDR provided remote maintenance from our company, the unit allows
you to monitor its status from a remote place.