37 | User Interface (UI)
7.3
Make a voice call
The Alphatron LT-3100 Iridium must be properly installed, connected, and configured before trying
to establish a phone call. The Alphatron LT-3100 Iridium will inform the user about the status of the
system, and whether the system is ready to initiate a call.
NOTE
Verify that the LT Alphatron LT-3100 Iridium is ready for making a voice call. Check
that the system status (system text and icons), as described in section System
overview on page 15, shows the correct system information.
Dialling a mobile originating (MO) voice call can be established in the two following modes:
•
On-hook mode (dial the number, and then off-hook)
•
Off-hook mode (lift the handset, get ready tone, and dial the number)
7.3.1
On-hook mode
In on-hook mode the user types in the called number, using the numeric keypad, without lifting the
handset out of the cradle or initially pressing the off-hook button. The typed in called number can be
edited until the user decides to press the off-hook button or lifting the handset out of the cradle.
Figure 22: LT-3110 Control Unit
–
voice call (on-hook mode)
Step-by-step instructions:
1.
Type in the called number (e.g. 004588301089) using the numeric keypad
2.
When the called number is complete:
a.
Lift the handset out of the cradle or
b.
Press the off-hook button (green handset button)
3.
The Alphatron LT-3100 Iridium will now establish a connection to the dialled number
Содержание Alphatron LT-3100 Iridium
