JPS ACU-5000, Инструкция по установке и эксплуатации

Страница: 77 / 86

ACU-5000 Operations Manual
Interoperability Now 9-11
9.1.9 Additional Operations
There are several additional operations that are helpful for quick control of system connections.
They include:
‘Disband’ to quickly disconnect an entire net.
‘Connect All’ to create a single net that includes all appropriate channels.
‘Mark Positions” and ‘Revert to Mark’ to temporarily modify the system connections
‘Disband All” to disconnect all channels in all nets
9.1.9.1 Disband
Use the Disband button from the set of controls in the Nets section to disconnect an entire
individual net. Click on the Net Number icon on the left of the screen, and then on Disband. Or
click Disband, and then the Net Number Icon. If any Net is selected when the Disband button is
pressed, all the channels in that net will be returned to the Free row. Alternatively, drag & drop
– drag the Net # icon up to the Free net icon.
9.1.9.2 Connect All
Under the More Actions selections on the right side of the screen are Connect All and Disconnect
All. If Connect All is clicked, all appropriate channels in the system will be connected into a
single large net. The only channels that are not appropriate for the Connect All function are
PSTN, SIP, and RoIP channels that are not currently engaged in a call with an external
communications device via a phone line or IP network.
To return all channels to the states they were in prior to invoking ‘Connect All’, select ‘Revert’
under More Actions. See more about the Revert feature in the following section.
9.1.9.3 Revert to Previous Connection Status via Channel Position Marking
The ability to “Mark” the current set of connections, make some temporary changes to the
connections, and quickly revert to the original connections can be very helpful and time saving.
First identify the connection status that you want to be able to revert to later by simply clicking
on “Mark Positions” (under “More Actions”). After this has been done, whenever “Revert” is
selected, the ACU-5000 channel connection state will revert to the set of connections in existence
when “Mark Positions” was selected.
Note: When “Connect All” is selected, the connection state is automatically marked, allowing
the operator to revert to the set of connections in place prior to the invocation of the Connect All
operation. The previous ‘Mark Positions” information will be lost.
9.1.9.4 Disband All
Use Disband All to break all current connections and move all channel icons back up to the Free
Row. Unlike Connect All; there is no automatic ‘Mark’ operation, so be sure to use it prior to the
Disband All operation if you want to return to previous status.