JPS ACU-5000, Инструкция по установке и эксплуатации

Страница: 28 / 86

ACU-5000 Operations Manual
4-2 Interoperability Now
The System tab provides the capability to view or change a variety of system configuration
settings as shown in the screen shot below. This overview can be reached by clicking on the
System tab; the various configuration settings pages can be reached by selection from the drop-
down menu or by clicking on the appropriate hypertext in the overview screen.
4.2.1 Network Configuration
This page is used to set the ACU-5000’s IP address and other network settings. The page includes
full instructions, and the default IP address can be seen in the screen shot below.
Note: Changes do not take place until “Save Configuration” is clicked.
Be sure to record the new IP address!
If you forget the new IP address, there are two ways to regain control of
the system. For security reasons, you must be local to the ACU-5000 to
perform either operation. See Section 8.3.