JPM MPS2, Руководство пользователя

Страница: 7 / 57

4
SYSTEM CAPABILITIES
OUTPUTS
Multiplexed
There are 256 multiplexed outputs in a 16 x 16 array. Sources 0 to 15. Sinks 0 to 15 connector HD1. Each output
is capable of driving a 1 w lamp at a supply of 50v DC in a 12.5% dut y cycle.
Reel Drives
There are sixteen dedicated reel drive outputs (0 to 15) connector HD2, each capable of driving 500mA at a
maximum pulse rate of 400 half steps per second.
Coin Inhibits
There are four T.T.L. outputs, output 7 to output 10 connector HD10, to operate electronic coin acceptor inhibits.
There are five open collector outputs, output 6 and output 11 to output 14, connector HD10, to operate
electromechanical AC solenoids via a triac.
Meters
There are nine meter drives, output 15 to output 23 connector HD9, each capable of sinking 1 A at 40v.
Direct Drives
There are six outputs, output 0 to output 15 connector HD8, capable of sinking 1A at 40v.
INPUTS
Reel Sensor Inputs
There are four dedicated inputs, input 0 to input 3 connector HD2, communicating directIy with the reel drive
processor.
Direct Inputs
There are nineteen inputs, input 0 to input 18 connector HD11 , each capable of sinking 10mA.
Coin Inputs
One input, input 20 HD20, is configured for microswitch use.
Inputs 21 to 24 connector HD1 0 are used for electronic coin accept signals.
Low Level Detector Inputs
Inputs 25 to 28 connector HD10 capable of sinking 10mA.
Non Payout Detector Inputs
Inputs 29 to 32, HD10 capable of sinking 10mA.