JPM MPS2, Руководство пользователя

Страница: 5 / 57

2
INTRODUCTION
Since the introduction of MPS1 , J.P.M. have decided to keep in line with technical advances and following their
continuous policy of improvement to introduce MPS2.
The MPS2 PCB is electronicaily compatible with the MPS1 PCB. The PCB is mounted in a moulded plastic
enclosure of the same size as the MPS1 PCB, thus making both units retrofittable. Cut-outs are provided for the
memory PCB and the bus interface connector .
As with the MPS2 main board, the new Linear PSU is completely compatible with the MPS1 power supply as
well as being especially designed for MPS2 machines.
The new power supply is designed to aid service engineers in the repair of J.P.M. machines.
This service manual should enable the field service engineer to ensure that the MPS2 machine is installed and
operating correctly, and also to assist him locate and correct any faults that may occur. It will also assist the more
technically minded workshop engineer via the circuit diagrams and the detailed explanation of the various
electronic circuits.
Note
The information contained in this manual, which remains the property of J.P.M. (Automatic Machines) Limited,
is loaned solely for the purpose of operating, maintaining and repairing J.P.M. equipment and may not be used
by, or loaned to, any person for any other reason. Neither may it, or any part thereof, be copied or reproduced by
any means or for any purpose, other than with the express permission of J.P.M. (Automatic Machines) Limited.
J.P.M. (Automatic Machines) Limited reserves the right to make any alterations to components and/or values
where necessary to conform to their policy of continuous product improvement and to keep pace with
technological advancement.