23
www.jperkinsdistribution.co.uk
SAVE [01] NiMH
14.4V 3000mAh
NiMH CHARGE At*
CUR LIMIT 5.0A
NiMH DISCHARGE*
4.0A 11.0V
NiMH CYCLE *
DCHG>CHG 3
Save...
PROGRAM SELECT
SAVE DATA
Press and hold “Start/Enter”
for 3 seconds
INC
DEC
INC
DEC
Start
Enter
Select PROGRAM SELECT SAVE DATA from the
main menu by pressing the “Start/Enter” button.
Set up the charge current for
Manual
mode or
the current limit for
automatic
mode. Toggle
between automatic and manual by pressing “Start/
Enter” and then the “INC” and “DEC” buttons
simultaneously.
Save data program
The LiPro Quad 6 charger has the capacity to store up to 5 charge programs per charger (a
total of 20), useful for storing programs for specific batteries.
These programs can be recalled at any time without having to set up the program again.
Programs can be saved for the following types of battery only:
LiPo, NiMH, NiCd and Gel cell (Pb, lead acid).
The parameters set up in this program do not affect the charge or discharge process, they
only represent the specifications of the battery.
Example: niMh battery SaVE set-up:
Use this screen set up the battery specifications.
To alter a value press the “Start/Enter” button and
then press “INC” or “DEC”. To enter the settings
for the program press and hold the “Start/Enter”
button.
Set up the discharge current and final voltage.
Set up the sequence of charge to discharge cycles
and the number of cycles.
Press and hold “Start/Enter” to save the program.
Press and hold “Start/Enter”
for 3 seconds
note: for the different batteries these screens will be different but the instructions on how to
change values and save the data is the same.
