Joyner JNSZ650DLB, Руководство пользователя и каталог запчастей, Страница: 52 / 146

2) Remove the rocker cover of head by removing two bolts (
See
Figure 60)
Figure 60
3) Check the anchor hole, if it is not on the direction shown by Fig. Repeat above 1 as to
obtain the hole position shown by Figure 53.
4) Insert the screwdriver into the hole, turn the drive of oil pump shaft until parallel to the
crankshaft (
See
Figure 62
,
Figure 63)
Figure 62
5) Align the mark 2 on the shaft of distributor to the mark 1 on the aluminum housing
(
See
Figure 63)
Figure 61